Technical Support

How to Install a Range Rover Air Suspension

How to Install a Range Rover Air Suspension

  • Tuesday, 02 August 2022
  • 0
  • 357
  • 0

How to Install a Range Rover Air Suspension

If you have a new Range Rover, you may be considering installing a Range Rover air suspension.range rover air suspension This system allows you to choose a different ride height depending on where you plan to drive it. You can lower the ride height if you plan to drive on the highway, while raising it for off-road driving. Low ride height helps you maintain an even driving surface. The air suspension system also helps you avoid rear sagging and bottoming out, a common problem when towing.

If you notice that your suspension sags while driving, this is a likely sign of a problem with your vehicle's air suspension. You can access the air pressure valve block on the front and rear of the vehicle by removing the right rear fender lining. The air pressure valve block can become faulty if it develops internal leaks. Fortunately, Land Rover has issued a recall to fix the problem, but many owners ignored the notice.

A damaged air bag is another common problem with Range Rovers. Damaged air bags can develop leaks at both top and bottom and blow out spontaneously. A slow leak can overwork the air compressor pump, which may cause further damage. On average, air bags will leak after a certain number of miles or six years in most climates. Air suspension sensors can also become damaged due to harsh weather conditions or being pulled beyond the vehicle's limits. If one or more of these sensors fail, the suspension can become stuck at a particular height, preventing leveling.

If you are looking to install a Range Rover air suspension, you can visit a specialist workshop or buy a high-quality replacement kit online. Alternatively, you can save money by installing the kit yourself at home. Most people can do the installation themselves with the assistance of a video installation guide. The installation process takes an hour or so per wheel and is easy to follow. You will need a sturdy jack and some hand tools.

If you have a high mileage Range Rover, you should check for suspension problems at least once a year. A loud compressor or an inability to lift or lower the car will be an indication that the air suspension system has failed. You should also take the vehicle for diagnostic testing to find out what is causing the suspension failure. As a general rule, the best way to check a Range Rover's air suspension is to perform a "bounce test" test. This involves pushing each corner of the car hard to see if it bounces or moves back. If the car bounces, you may need to replace the air suspension components.

A replacement air compressor is an expensive part. The cost of a new air compressor depends on the age of the vehicle. Depending on how much mileage your Range Rover has, an air compressor can cost anywhere from $1,200 to $1,400. If you find yourself in need of one, you should not delay the repair. This system is vital for the safety of your Range Rover. When the compressor fails, you'll notice a sagging corner or even the whole car.

Tags:2007 mercedes gl450 air suspension compressor | 2014 ram 1500 air suspension compressor

0users like this.

Leave a Reply